Ten Points Transparent 65 Inch ILITEK EETI PCAP Touch Panel
65inch PCAP Touch Panel 10 Touch Points with GFF ITO Touch Solution
This 65" PCAP is GFF structure, it is using SP- ITO film for touch sensor, which is a thin film material that can conduct electricity and behave as optically transparent. It is an extremely important optoelectronic material. It is widely used in P-cap Touch Panel,Smart Window,EMI etc.
Compared with other materials, SP-ITO has good electrical conductivity, good light transmission, excellent flexibility, high cost performance, good stability, can make super-narrow bezel, flexible touch screen and no moiré issue
Basic specification of Capacitive Touch Panel :
| Size | 65 inch |
| Total thickness | 5.5±0.5mm |
| Outline of Cover Lens | 1466.5*846.6 + 0/-1mm |
| Outline of ITO film Sensor | 1466.5*846.6 ±0.5mm |
| Viewing Area | 11431.5*806.1 ±0.5 mm |
| Active Area | 1434.5*809.1±0.5 mm |
| Interface | USB |
| Input voltage | DC5V |
| Response time | 10ms |
| Report rate | 100 HZ |
| Input method | Hand writing or capacitive pen |
| Transmittance | ≥85% |
| Package list | 65 inch Touch panel,controller board and USB cable |
| AG Haze Degree | 6±2 |
Capacitive Touch Panel:
Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
Advantages of SP-ITO Touch Screen
1. Compared with other materials, SP-ITO has good electrical conductivity, good light transmission, excellent flexibility, high cost performance, good stability, and no moiré issue.
2. Realize process simplification: The new material application process can directly simplify more
than half of the traditional process, and the yield rate is greatly improved.
3. Cost down:
a. The application of new materials can eliminate all silver paste manufacturing processes and reduce the production cost of products.
b. The application of new materials can reduce the investment of production
personnel by more than half compared with the traditional production process.
Competitive advantages of Touch-China:
1. 21-year experience in designing and manufacturing touch panels.
2. Have strong research team for both software and hardware and provide before and after-sale service.
3. Cooperate with excellent customers and suppliers.
4. Have long-term cooperation with excellent IC suppliers all over the world.
5. Have good guarantee for product quality and lead time.
6. Our touch panels of large sizes and touch panels for automobile are in a leading position in touch panel industry.
SP-ITO FF sensor Reliability test
| Item | Test Condition | Spec | Test request | Check Point |
| Before testing | First | Result | Second | Result | Third | Result | Four | result |
| Low temperature | -40℃ | 504H | OK/OK | 0h | 72h | Pass(0F/5) | 144h | Pass(0F/5) | 336h | Pass(0F/5) | 504h | Pass(0F/5) |
| High temperature | 65℃/90%RH | 504H | OK/OK | 0h | 72h | Pass(0F/5) | 144h | Pass(0F/5) | 336h | Pass(0F/5) | 504h | Pass(0F/5) |
| Low and high temperature | -40℃~85℃ | 300cycle | OK/OK | 0cycle | 50cycle | Pass(0F/3) | 100 cycle | Pass(0F/3) | 200 cycle | Pass(0F/3) | 300 cycle | Pass(0F/3) |
| UV testing | 0.35±0.02W/(m2·nm) at340nm | 470h | OK/OK | 0h | 235h | Pass(0F/3) | 470h | Pass(0F/3) | / | / | / | / |
| Salt water testing | The whole surface is coated with salt water and placed in a high temperature and high humidity chamber | 168h | OK/OK | 0h | 24h | Pass(0F/5) | 72h | Pass(0F/5) | 168h | Pass(0F/5) | / | / |
SP-ITO material parameter
| SP-ITO-10 | Unit | Spec | Test Method |
| Resistance | Ω/□ | 10 | ASTM D 991 |
| Transmittance | % | 86 | ASTM D1003 |
| Haze | % | 0.42 | ASTM D1003 |
| b*(T) | % | 1.4 | ASTM E1164 |
| Uniformity | % | 2.5% | (Max.-min.)/ 2•Ave |
| Warping | - | bending radius of 20mm | 125umPET is 100000 times |
| Adhesion | - | 5B | ASTM D3359 |
| Dyne(HC) | - | 40 | Arco pen 5s |
PCAP drawing:
Product Tags:
|
|
ILITEK EETI PCAP Touch Screen Panel Ten Points Transparent 65 Inch Images
|
